|
|
Post by richardsenior on Nov 3, 2008 11:25:26 GMT -5
I've spent the best part of 3 days searching, and as far as I can tell there doesn't appear to be a dual concentric linear taper pot available from anywhere.
Does anyone know differently?
|
|
|
|
Post by D2o on Nov 3, 2008 11:41:39 GMT -5
I've spent the best part of 3 days searching, and as far as I can tell there doesn't appear to be a dual concentric linear taper pot available from anywhere. Does anyone know differently? I am not sure if this is what you are looking for, but maybe these guys can help (I have no personal experience - good or otherwise - with them): www.has-sound.com/parts.htm#Pots - about a quarter of the way down the page. D2o Or, even .... gasp ...
www.warmoth.com/hardware/parts/parts.cfm?fuseaction=include_potentiometers
... roughly halfway down the page.
Desperate times call for desperate measures. |
|
|
|
Post by newey on Nov 3, 2008 11:53:28 GMT -5
D2o-
The Warmoth one doesn't say whether it's a linear or log taper. It's probably log (audio) taper.
Your other link states it's an audio (log) taper and therefore not what Richard wants. Although they state they will custom make concentric pots, it sounds like they mean they'll make various resistances available, not other tapers.
|
|
|
|
Post by D2o on Nov 3, 2008 12:04:35 GMT -5
D2o- The Warmoth one doesn't say whether it's a linear or log taper. It's probably log (audio) taper. Your other link states it's an audio (log) taper and therefore not what Richard wants. Although they state they will custom make concentric pots, it sounds like they mean they'll make various resistances available, not other tapers. You are most likely correct on both interpretations. Thanks for the clarification, newey.  D2o |
|
|
|
Post by ChrisK on Nov 3, 2008 17:31:28 GMT -5
Why do you want a dual/concentric linear taper pot?
|
|
