I got the diagram from the guitar nuts site under modifications at the bottom there's a mod called tre five. I don't know how to get a pic into the thread. I have it wired up and it works as it should all except I have no tone controls hooked up yet. I'm assuming they will go to the two lugs marked "3", one for the bridge and one for the mid, but I'm not sure. Any help would be greatly appreciated.
And, to answer you original question, you can follow this link for wiring in the volume and tone control for a single volume\single tone configuration. Just ignore the 5 way wiring in the attached link and take the lead off pole "1" highlighted "Volume" and work through the rest of the diagram accordingly.
Last Edit: Mar 29, 2009 9:54:24 GMT -5 by cynical1
"Fascism should rightly be called Corporatism, as it is the merger of corporate and government power." - Benito Mussolini
"When fascism comes to America, it will be wrapped in the flag and carrying the cross." - Sinclair Lewis (1935)
"History, in general, only informs us of what bad government is." - Thomas Jefferson
“Be yourself; everyone else is already taken.” - Oscar Wilde
Post by relicstrat on Mar 29, 2009 10:41:09 GMT -5
Great, the master vol and tone should be the easiest way to go. I'm warming up the soldering iron now. I've done the QTB mod but that shouldn't be any problem. I hope. Thanks for the help, this moding thing can get quite addictive as I've found out already when I purchased an epi junior head and lost myself in it for a few months, the results were well worth the time. Tons of fun!