|
|
Post by ashcatlt on Nov 29, 2010 21:04:10 GMT -5
This is from a dude on the DIYStompboxes forum. A pretty good idea, though I'm sure input-Z is a bit low, and it probably wants a signal level higher than a typical guitar, so like he says it wants a preamp or something in front.
|
|
|
|
Post by sumgai on Nov 29, 2010 21:48:13 GMT -5
ash, Great find! Indeed, those "iPod" retransmitters do expect to see about 32Ω or so, in the impedance department. Still, his stompbox was proof enough that the unit will tolerate a wide latitude in that regard. But when all is said and done, if you have to have a battery on board anyways, to power this thing, you might as well stuff a single-FET buffer in there too, eh?  sumgai |
|
|
|
Post by gfxbss on Nov 29, 2010 22:32:42 GMT -5
Woah, I'm impressed. I would have never thought of that one....
Tyler
|
|
|
|
Post by Yew on Nov 30, 2010 7:25:21 GMT -5
For a wireless system. I think a cheap wireless microphone should be easy to modify
|
|
