Wiring for stereo?

[phvdv]

Hi,

I have a Marshall AVT275, meaning that I have two speakers.
Couldn't I make use of that situation? I mean: would it possible to have for instance the neck pickup on the right channel and the middle and bridge pickups on the left channel.
Does any have any experience with this, and if, so, what does the wiring look like?
My strat setup is as follows: 3 single coil pickups, 5 way switch, 1 master volume, 1 master tone and 1 no load as blend pot to blend the bridge pickup into the rest.


Thanks,
Philippe

[wolf]

phvdv
I have a diagram on my website:
www.1728.com/guitar3.htm
(2nd diagram on that page).

Yes it is not precisely what you want but I imagine it would not be much work to draw one specifically for a Strat.

Can the 2 speakers be separated or are they in the same cabinet? If they can't be separated, a lot of the stereo effects and tricks will be lost.

Incidentally, I wired my Gibson SG for stereo a few decades ago. I found it to be more trouble than it was worth. And it went back to mono shortly thereafter.