wesman
Apprentice Shielder
Posts: 38
Likes: 0
|
Post by wesman on May 28, 2005 10:25:54 GMT -5
What are the advantages/ disadvantages of each?
|
|
|
|
Post by JohnH on May 28, 2005 16:31:18 GMT -5
Assuming you are asking about one of these on a Strat (3x SC and a 5-way lever switch) to let you combine neck and bridge, or all three pups? I can't see any difference to the sounds that it adds (both would add these two extra).
You could think about whether you want to press the switch quickly during a song (without needing to move the 5-way), to go from bridge to neck and bridge (needs a neck on), or neck to neck and bridge (needs a bridge on)
John
|
|
wesman
Apprentice Shielder
Posts: 38
Likes: 0
|
Post by wesman on May 28, 2005 19:17:33 GMT -5
Ultimatley what I will have is,
A GFS "Hot Rails" type in the bridge connected to a 5 position
rotary switch to do the series/ parallel/ out of phase thing.
An EMG in the middle, and an old Dimarzio HS2???
in the neck w/ the standard 5 way blade switch.
Soooooo, while I have her apart I was going to chuck the
scratchy old volume pot & mabye throw a push- pull pot
in there for a little extra bling.
|
|
|
|
Post by bam on May 28, 2005 23:49:36 GMT -5
Depends. If you often use neck, bridge-on is more preferable, and vice versa.
|
|
