|
Post by socaldistro on Mar 24, 2012 17:18:18 GMT -5
|
|
|
Post by reTrEaD on Mar 24, 2012 18:07:26 GMT -5
Welcome to Guitarnutz2. but I cannot figure out where the wire goes, there is one single wire coming out of the guitar. and everything else is attached to the face plate of it. I'll guess that the wire is not shown in the photo and you don't mean the blue shielded pickup cable going to the volume control. It sounds like you're talking about the string ground. That would connect anywhere that also connects to the sleeve of the output jack. The puddle of solder on the back of the volume pot, where the shield from the pickup cable and the black wire that goes to the back of the tone pot would be as good as any place. Or the puddle on the back of the tone pot. Or the sleeve connection of the output jack, if the wire is long enough. Basically anywhere that has a black wire connected to it. After you get this reassembled, feel free to post a pic of the paintjob in the guitars forum of the board.
|
|
|
Post by socaldistro on Mar 24, 2012 18:09:36 GMT -5
The wire not shown is a single wire coming out of the guitar, that connects the front to it, I just don't know which one to connect it to, in the pics.
|
|
|
Post by socaldistro on Mar 24, 2012 18:11:23 GMT -5
Yeah, I have no idea, what the names of any of them are, but if you would let me know, mid, left right, or something, I see a loose single prong on the mid one, looks like it's missing something, would it go there? And is the wire just basically a ground, everything runs of the face plate and the pick up?
|
|
|
Post by socaldistro on Mar 24, 2012 18:12:46 GMT -5
Ohh ok, I see. I will post when im done, thank you.
|
|
|
Post by reTrEaD on Mar 24, 2012 18:24:03 GMT -5
Yeah, I have no idea, what the names of any of them are, but if you would let me know, mid, left right, or something, Okay, so you are a complete novice to wiring. No probs. In the top photo, your output jack is on the left. Tone control is in the middle. Volume control is on the right. I see a loose single prong on the mid one, looks like it's missing something, would it go there? The lug on the tone pot with the white wire going past it? No, don't connect anything there. It's not supposed to be connected. And is the wire just basically a ground, everything runs of the face plate and the pick up? I think the wire you've been talking about connects to the strings through the bridge or tailpiece. But it isn't shown in any of your photos, right? EDIT: I see in another post you confirmed it isn't shown in any photo. If we're both talking about the same thing, that would connect to anywhere that has a black wire. So the puddle on the back of the volume pot seems like a good place. I see someone has written GND with an arrow pointing to the volume control. That suggests maybe the wire was originally connected there.
|
|
|
Post by socaldistro on Mar 24, 2012 18:42:54 GMT -5
Awesome, thank you for all the feed back, you guys are awesome. Ill try it tonight when lacker dries, Can take a pic because the wire is taped up. But I really apprecaite the feed back . It's actually funny, I posted on the actual gibson bored, and didnt get one reply. And you guys are on it. Epic.
Thank you
I will post pic of wire if it doesnt work tonight.
Thanks again
Mike
|
|
|
Post by reTrEaD on Mar 24, 2012 20:50:24 GMT -5
It's been a pleasure working with you. Best of luck with the paint and the soldering. See ya soon!
|
|