zaemon
Rookie Solder Flinger
Posts: 2
Likes: 0
|
Post by zaemon on Apr 3, 2012 20:46:15 GMT -5
Hi guys,
I was wondering if anyone can help me with a quick query regarding Seymour Duncan humbuckers and the wiring.
Looking at the SD range of humbuckers, and some schematics I've seen, am I correct to assume that the coils with the adjustable pole pieces are connected to the green and red wires?
I hope someone can help me here.
Thanks
|
|
|
Post by reTrEaD on Apr 3, 2012 21:51:26 GMT -5
There might be an exception to the rule, but you are correct. Red/Green corresponds to the south coil (screw) coil. Black/White is the north (slug) coil.
|
|
|
Post by newey on Apr 3, 2012 21:55:43 GMT -5
|
|
zaemon
Rookie Solder Flinger
Posts: 2
Likes: 0
|
Post by zaemon on Apr 3, 2012 23:29:50 GMT -5
Thanks for the replies guys.
I guess where I'm coming from with this question is how you can choose either a Neck or Bridge pick up when selecting pickups from SD.
So I just wanted to be sure that the coils with adjustable poles are the same polarity.
Cheers!
|
|