lbw
Rookie Solder Flinger
Posts: 18
Likes: 0
|
Post by lbw on Jul 23, 2005 7:57:44 GMT -5
Hi,
Anyone know where I can buy a 50K pot with a push-pull? I did some googling and I found some 50K pots but nothing with a push-pull.
Any ideas?
Thanks.
|
|
|
|
Post by Trey on Jul 24, 2005 16:38:43 GMT -5
That's probably going ot be a tough one, I would just use a reisistor inline with a 250k pot to knock it down to 50k. I checked Allparts.com, because they usually have everything under the sun, but they don't have any 50k push/pulls...
|
|
lbw
Rookie Solder Flinger
Posts: 18
Likes: 0
|
Post by lbw on Jul 24, 2005 20:29:16 GMT -5
A resistor inline? You mean in parallel? A 63 ohm resistor would do I guess!
The problem though is that volume attenuation would be non-linear.
|
|
|
|
Post by RandomHero on Jul 28, 2005 18:06:44 GMT -5
EMG markets push-pulls at 25k to suit their active systems. I know it's not right on but it's closer than you might find elsewhere...
|
|
|
|
Post by Happyguy on Jul 30, 2005 10:26:52 GMT -5
Stew mac also has 25k push-pulls.
|
|
|
|
Post by CheshireCat on Aug 2, 2005 23:09:58 GMT -5
Anyone know where I can buy a 50K pot with a push-pull? For what purpose? |
|
lbw
Rookie Solder Flinger
Posts: 18
Likes: 0
|
Post by lbw on Aug 3, 2005 4:49:38 GMT -5
The Clapton signature Stratocaster (with the mid-boost pre-amp) uses a 50K volume pot.
|
|
