Diagrams request

[Mini-Strat_Maine]

Would any of our Graphics Gurus be willing to draw up a schematic and/or wiring diagram for me?
I'm getting the parts together to begin a "Tone Monster" mod, with these changes:

• Push-pull (500K) volume pot for lead/rhythm selection. Will probably also add a "treble bleed" kit to it. (Still working on the exact values I want for the cap and resistor.)
  
• Lead tone pot push-pull, to select two different cap values. (Probably .015 and .047 µf.)
  
• Rhythm tone pot probably an RG500D. (See www.guitar-mod.com and click on "Guitar Mods" in the list at the left of his home page. The pot is the first one described on the Mods page.)
  

No one would ever mistake me for an electronics tech, although I do know which end of the soldering iron to hold. I'm guessing that with what I'm planning for the tone pots on my version, the caps shown in the schematic on can be eliminated. Am I right?

Thanks for any input.

--
Doug C.

[wolf]

One of the things you want is:
Lead tone pot push-pull, to select two different cap values. (Probably .015 and .047 µf.)

Might as well get you off to a start.
Go to this page www.1728.com/guitar3.htm
and scroll down to the 3rd diagram with the header "2 Capacitor Tone Control".
Well, it's a start.

[Mini-Strat_Maine]

wolf said:

Might as well get you off to a start.
Go to this page www.1728.com/guitar3.htm
and scroll down to the 3rd diagram with the header "2 Capacitor Tone Control".
Well, it's a start.

And a good one. Thanks, Wolf.