blues101
Rookie Solder Flinger
Posts: 3
Likes: 0
|
Post by blues101 on Nov 25, 2005 12:15:16 GMT -5
can anybody help with wiring two seymour duncan pearly gates in a srat with a 3way switch and 1 volume pot.
|
|
|
|
Post by jimplaysguitar on Nov 25, 2005 12:23:54 GMT -5
What is the pickup/control layout right now?
|
|
blues101
Rookie Solder Flinger
Posts: 3
Likes: 0
|
Post by blues101 on Nov 25, 2005 12:46:32 GMT -5
hi, well this is a new project and i was looking at the duncan wiring diagram and trying to figure out the soldering on a fender three way switch, front position of switch neck pickup, middle neck and bridge, back position bridge only
|
|
|
|
Post by jimplaysguitar on Nov 25, 2005 12:53:18 GMT -5
Here we go, i believe this is what you wanna do, although you should probably wait for comfirmation, cause i'm not entirely sure, lol.  |
|
blues101
Rookie Solder Flinger
Posts: 3
Likes: 0
|
Post by blues101 on Nov 25, 2005 13:25:14 GMT -5
thanks jim, that looks right, was checking it with a meter. it makes sense!!!
|
|
|
|
Post by jimplaysguitar on Nov 25, 2005 13:31:10 GMT -5
Cool, no problem ;D
|
|
