|
|
Post by dfieber1979 on May 13, 2015 16:47:40 GMT -5
this is in regards to the guitar with the 4 p90s and wiring and knobs All I can say is if that is possible that would be a cool guitar .. but it also depends of they are hum canceling or not .. and it would be tricky to play cause the switches may be in the way
but what I am thinking is why not get rid of all the switches and go with 4 five way switches and 4 concentric pots and again this is not to put anone down just a simple question is all  |
|
|
|
Post by ashcatlt on May 13, 2015 17:19:12 GMT -5
This doesn't belong here, but I can't move it, so... You're talking about this, no?  You're aware that this is a joke? Just somebody playing with photoshop. Sorry to burst any bubbles.  I'm not sure anybody ever bothered to make up a "truth table" or assign functions to any of those switches or knobs, but that might be fun. |
|
|
|
Post by sumgai on May 14, 2015 3:03:38 GMT -5
Ahh, jeez ash - you went and told a newbie that we ain't got no Mojo here in The NutzHouse. You might as well have told him that ain't no such thing as Santa Clause... shame on you! p.s. I'd spew some unspecified liquid on my screen if dfieber came back and admitted that he was D2o, dropping by to see who he could troll.  |
|
|
|
Post by dfieber1979 on May 14, 2015 19:30:25 GMT -5
well I had no idea LOL and I am a newbie here
thanks for burstin My bubble |
|
|
|
Post by ashcatlt on May 14, 2015 20:00:31 GMT -5
Sorry! If you've got ideas, we can start to sort it out.
It's still in the wrong forum.
|
|
|
|
Post by Runewalker on May 14, 2015 22:33:38 GMT -5
 Made my day. RW
|
|
|
|
Post by sumgai on May 15, 2015 11:44:40 GMT -5
OK, ash, where do you want me to put this thing? Can't make a "Tone Forum" like Runewalker wants, but hey, I'm up for ideas. dfieber, Yes, we "gotcha", but that was to be expected - it had to happen sometime in the future, after the photo-shopped image was first posted... you just happen to be the lucky guy - sorry 'bout that. But we can, and have, come up with some odd schemes. In fact, my cohort himself (newey) has done what he called The 4-caster... you might want to start there, and see if anything trips your trigger. HTH sumgai |
|
|
|
Post by ashcatlt on May 15, 2015 17:40:15 GMT -5
OK, ash, where do you want me to put this thing? Hell, I don't know! Isn't this why you get paid the big bucks? I guess General Wiring is better than this place where we put finished schematics, no? |
|
|
|
Post by sumgai on May 15, 2015 23:58:33 GMT -5
OK, ash, where do you want me to put this thing? Hell, I don't know! Isn't this why you get paid the big bucks? I guess General Wiring is better than this place where we put finished schematics, no? For a wonder, my Admin-Fu seems to have deserted me... I can move individual posts to a different thread, one or more at a time, but I can't seem to move an entire thread intact to a dfferent sub-forum. newey, do you know anything about this?  No bucks of any sized were earned in the making of this post! |
|
|
|
Post by newey on May 16, 2015 9:24:40 GMT -5
Don't know why you're having a problem, sg. Consider it done, I put the whole shebang into "Guitars" because "wiring" didn't seem appropriate. And, I don't know how I missed being twice gently nudged by Ash to move this . . .
sg, you should be able to do this by using the pull-down menus with the gear logo. The menu gives the option to "move post", and when you hover over that, you get the side menu choices, to just move the one post, or "and all below" or "and all above". A new window then opens asking where you want to put the new thread, and you have to re-title it as well. There is also an option to PM the member to tell them that the thread has been moved.
The old software used to have an option to leave a message in the old location, and, if a thread was moved without leaving the message, all the links in the thread would be broken. The new software doesn't leave a message, so the PM to the member helps the person find the moved thread. And the links now stay intact after the thread is moved.
|
|
|
|
Post by sumgai on May 16, 2015 10:56:25 GMT -5
Since we're doing this in public....
newey,
Yes I got all that, but what I'm wondering is, why is there an option to move an entire thread, but nothing behind the curtains, so to speak. Electing to move one or more individual posts, I see the same page (window) you do, but that doesn't leave the thread intact with the original poster's name on the index page. Instead, a new thread is created, with the Admin who moved the thread now being identified as the originator. That's bad form, as they say in the hoity-toity parts of society.
All of which explains why I didn't move it in the first instance (ash's first nudge), I thought I might've been missing something in executing the process. You've more-or-less confirmed that the process is broken, and a kludge is the only way to do it. Sad, that.
No further comment, cuz....
sumgai
|
|
Deleted
Deleted Member
Posts: 0
Likes:
|
Post by Deleted on Jun 7, 2019 13:18:24 GMT -5
all you need is a 4 Bit Hex Switch .. lets you pick 4 Pickups But i THINK this will let you Select 4 Pickups and Phase 3 of them 
so if you just had 3 Pickups you can cut out SW-Y and Where Y+ and Y- be on SW-X you change it for Z+ and Z- Also D+ and D- for M+ and M- |
|
I'm not sure anybody ever bothered to make up a "truth table" or assign functions to any of those switches or knobs, but that might be fun.
