|
|
Post by frets on Aug 4, 2020 16:23:27 GMT -5
 John, I am experiencing difficulty with your Crossover Wiring. I used the On/On/On Option. When I have the switch in the middle, I only get the bridge. The neck is just dead dead dead. Help!! |
|
|
|
Post by JohnH on Aug 4, 2020 16:38:45 GMT -5
OK sure
First, just to confirm wire colours from the pickups, drawn based on Dimarzio?
Next, if you have a 4 pole on-on-on, check which lugs are connected to which in the centre position. The assumed arrangement, seen from the back, is as shown by the fine dashed red lines between switch contacts.
Then, when its in this dead, centre position, knob controls at full, what is the resistance of the guitar at the jack, hot to ground?
|
|
|
|
Post by frets on Aug 4, 2020 18:42:25 GMT -5
It’s the DiMarzio color scheme, I do everything Seymour-Duncan, it’s like being an automaton. Thanks John.
|
|
