Post by ssstonelover on Feb 1, 2024 17:40:35 GMT -5
Sometime ago I created a wiring that ended up working as intended after some iteration series-single-parallel-using-switches and then about 3 days someone asked for an extension on that theme (so the coils could be 'inner coils' or 'outer coils' using a push-pull pot (up or down). Also he wanted a kill switch...
In his words:
"finally I was hoping to have a push/pull on the tone knob that coil splits to both inner coils and selects them both, bypassing the pickup selector. I use both inner coils a lot for ambient clean and Strat-like sounds so will be useful to get this with just one pull."
From the basic design I worked out the requested variant, but it introduced issues, thus I reworked the idea to a far sounder design using a 3PDT on-on switch.
In his words:
"finally I was hoping to have a push/pull on the tone knob that coil splits to both inner coils and selects them both, bypassing the pickup selector. I use both inner coils a lot for ambient clean and Strat-like sounds so will be useful to get this with just one pull."
From the basic design I worked out the requested variant, but it introduced issues, thus I reworked the idea to a far sounder design using a 3PDT on-on switch.