|
Post by dannyhill on Nov 6, 2011 1:46:13 GMT -5
Sleep. what's that? I followed what you said Newey, and just wired them up, reading neck for bridge PUP and vice-versa. The only thing is that ny 3 way doesn't look like yours, mine has all 7 contacts in a row. Anyway first I had the ground and hot the wrong way around at the jack, here I had only the amp hum (same if guitar plugged in or not) but the hum got a lot worse anytime I touched a metal part. Soldered the jack the other way around and now the hum doesnt get worse when I tough metal. Only I still don't have any sound from the PUPs! Ground loops? Bad soldering? Contacts mixed up??? Help guys!!!!!!
Cheers,
Danny PS Thanks for the waram welcome and help so far.
|
|
|
Post by dannyhill on Nov 5, 2011 10:27:47 GMT -5
Hi Newey, Many thanks. Sorry for replying late, I didn't get an email alerting me to a reply. Sound wise, yes, of course they will be same...except in my case with a two lead humbucker case single coil in the bridge I will get a lot of noise once the poles go hot on phase reversal. In the neck I can put a cover on the PUP and ground that so I can lift the negative lead is lifted above ground. I either picked that up on guitar nuts or deaf-eddie's page. Cheers, Daniel
|
|
|
Post by dannyhill on Oct 21, 2011 7:00:57 GMT -5
Hi, Old thread I know. Anyone still reading this? Newey, I would like to wire my tele up so, but how can switch it around so the neck is placed in and out of phase? Is it just a question of swapping the + connections over from the bridge to neck and viceversa, and similarly for the - connections? Thanks in advance. Daniel
|
|